6061-T6 Aluminium

Road & Track DFV Coilover System, GT3 / GT3 RS / GT2 (997)

Inverted monotube dampers with a floating internal piston, whose Dual Flow Valve shifts all four damping regimes from a single knob.

Road & Track DFV Coilover System, 911 Carrera (991)

The Carrera-valved version of the Road & Track system, on noticeably softer front springs than the GT3 fitment.

Road & Track DFV Coilover System, 911 (992)

Road & Track dampers valved for the 992 chassis.

Two-Piece Front Brake Rotors, 911 GT3 (991)

380 mm floating two-piece rotors on aluminium hats, using curved internal vanes that pump cooling air outward under rotation.

PCCB to Iron Rotor Conversion, GT3 / GT2 RS / 718 GT4 RS (991 / 992)

Two-piece iron rotors that bolt to the PCCB calipers, so a car can be tracked without consuming carbon ceramic discs.

Two-Piece Floating Replacements for PCCB Rotors, GT3 / RS / Turbo S (991 / 991.2)

Set of four direct replacements for the OEM ceramic rotors, for owners who would rather not put PCCB discs on track.

High-Performance Centre Radiator (7243), 911 (992)

All-aluminium centre radiator on a two-row 42 mm core, using B-shaped tubes brazed over the seam to add surface area without choking flow.

All-Aluminium Left Radiator (7086), 911 / GT2 / GT3 (991.2)

Side radiator on the same two-row B-Tube core, shared with the 718 Boxster and Cayman.

Performance Centre Radiator, 911 Turbo / GT3 / GT3 RS (991)

Centre radiator for the 991 Turbo and GT3 family.

Performance Centre Radiator, GT3 / GT3 RS / GT2 (997 / 997.2)

Centre radiator for the 997 GT cars, where centre-mounted cooling takes the worst of the track heat load.

QC and Offset Camber Plates, 911 / 912 / 930

Camber plates for the torsion-bar cars, in quick-change and fixed-offset forms.

Front Strut Brace Kit, 911 (993)

Alloy front strut brace that bolts in without drilling or welding, aimed at limiting camber change under cornering load.

US$249.00Recorded 2026-08-17

Strut Braces, 911 (993)

Front strut tower bracing.

Strut Mounts, 911 (993)

Replacement upper strut mounts, including monoball options.

Tunable Semi-Solid Engine Mounts, 911 (964 / 993)

Engine mounts with swappable inserts, so drivetrain rigidity can be dialled without committing to solid mounts.

Big Brake Kit, 911 (993)

Monoblock aluminium calipers with two-piece rotors on aluminium bells, supplied with brackets, braided lines and pads.

G50 Short Shifter, 911 (993)

Short shift mechanism cutting lever travel by roughly 30%, installed in the stock housing with no irreversible modification.

G50 Shift Rod Joint Coupler, 911

Replaces the shift joint coupler and its rubber isolator, the slop that makes an old G50 feel vague.

Shift Linkage Components, 911 (993)

Bushings and linkage hardware for tightening the 993 shift action.

Crankshaft Pulley, 911 (993, 1995–98)

Replacement crankshaft pulley from an air-cooled specialist that manufactures its own parts.

Billet Aluminium Fan Hub, 911 (964 / 993)

CNC billet fan hub converting the two-belt drive to the single-belt arrangement used on the factory RS cars.

Transmission Components, 911 (993)

Rothsport's own gearbox component range for air-cooled cars.

Billet Aluminium Collapsible Oil Return Tube Kit, 911 (930 / 964 / 993)

Collapsible return tubes that fit without pulling the valve covers — addressing the single most common air-cooled oil leak.

Turbo S Secondary Front Oil Cooler Kit, 911 Turbo (964 / 993)

Turbo S-type auxiliary cooler mounting under the front bumper reinforcement, and compatible with air conditioning — which is the constraint that usually kills front cooler installs.

Additional Oil Cooler Upgrade, 911 (993)

Auxiliary oil cooler package derived from Porsche Motorsport practice, for 1994–98 Turbo and Carrera cars.

Finned Aluminium Oil Return Tubes with Viton Seals, 911 (993)

One-piece finned tubes on Viton seals, as an alternative to the collapsible design.

Perforated Aluminium Pedal Set, 911 (993)

Machined aluminium pedals, the usual first interior change on a track-driven 993.

Seat Mounting and Accessories, 911 (993)

Seat brackets, bases and mounting hardware for aftermarket shells.

Driver and Passenger Race Floor Boards, 911 (993)

Aluminium floor boards replacing carpet and sound deadening.

Lightweight Battery Mount Kit, 911 (964 / 993)

Aluminium mount sized for a lightweight battery, taking mass off the extreme front of the car.

Billet Aluminium Valve Covers, 911 (993)

Machined valve covers replacing the cast originals, which warp and leak with age.

QC and Offset Camber Plates, 911 (993)

Quick-change and fixed-offset camber plates for the 993 strut tops.

GT1 Centre-Lock Forged Wheels, 911 (997.2 / 991 / 991.2)

Forged monoblock centre-lock wheel machined from 6061-T6 aluminium — included as the direct aluminium comparison to the magnesium sets, and because it is frequently assumed to be magnesium.

Billet Aluminium Fan Shroud, 911

CNC billet aluminium shroud offered against the cast aluminium and magnesium originals — the aluminium answer to the same cracking problem.

Nickies Billet Aluminium Cylinders, air-cooled 911

CNC billet aluminium cylinders with nickel silicon carbide bore plating, replacing the original cast iron or Alusil barrels across the whole air-cooled range.

Nickies Cylinders, 86.7 mm, 911 2.2 / 2.4

86.7 mm bore Nickies for the early two-litre-family engines.

Nickies Cylinders, 92 mm, 911 2.7

92 mm bore for the 2.7, the engine whose magnesium case and thermal behaviour made it the classic candidate for aluminium barrels.

Nickies Cylinders, 95 mm, 911 / 930 3.0 / 3.2

95 mm bore covering the 3.0 SC and 3.2 Carrera, and the 930 Turbo.

Nickies Cylinders 95 mm with 9.5:1 JE Piston Set, 911 3.2

Matched cylinder and forged piston package at 9.5:1 — the pump-fuel compression ratio.

Nickies Cylinders, 98 mm, 911 / 930 3.2 / 3.4

98 mm big bore taking a 3.2 out to 3.4.

Nickies Cylinders 105.029 mm with 12.5:1 JE Piston Set, 911 3.6

The largest bore in the range at 105.029 mm, paired with 12.5:1 forged pistons — a race compression ratio, not a road one.

Knock Sensor Bosses for Nickies Cylinders, 911

Cast-in bosses letting a knock sensor be fitted to an air-cooled engine — the enabler for modern management on a big-bore build.

Strut Brace (Domstrebe), 911

Front strut tower bracing from a German cage and chassis maker.

Series 9 Oil Cooler, 919 19-Row

Epoxy-treated aluminium oil cooler — the motorsport default, and directly relevant to air-cooled 911s where oil is the cooling system.

Solid Engine Mounts, 911 (964 / 993 / 996 / 997)

Aluminium solid mounts replacing the rubber originals, of the type fitted to Porsche factory race cars.

Euro RS Engine Mount Set, 911 (964 / 993)

Lightweight aluminium carriers with RS sport rubber, replacing the standard hydro-elastic mounts.

Semi-Solid Engine and Transmission Mounts, 911 (993)

Positioned as more precise than factory RS mounts at lower cost — the compromise between solid and standard.

Solid Transmission Mount Set, Motorsport (964 / 965 / 993)

Solid motorsport transmission mounts, which FVD itself advises against on a street car.

Air-Cooled EFI Individual Throttle Body System

Full ITB and EFI conversion for air-cooled flat sixes, replacing the factory injection entirely.

US$13,500.00Recorded 2026-08-17

Air-Cooled EFI Valve Cover and Ignition Kit

Valve covers with integrated coil mounting, part of the EFI conversion.

US$1,450.00Recorded 2026-08-17

Air-Cooled EFI Cam Sensor Kit

Cam position sensing, required for sequential injection on an engine that never had it.

US$235.00Recorded 2026-08-17

Air-Cooled EFI Distributor Block-Off

Closes the distributor aperture once ignition moves to coil-per-cylinder.

US$85.00Recorded 2026-08-17

DFV Road & Track Coilover System, 911 (993, all models)

The 993 fitment of the Dual Flow Valve system, covering Carrera through Turbo.

US$5,800.00Recorded 2026-08-17

Coilover Damper Kit, 911 Carrera 2 (964)

Japanese coilovers catalogued per 964 variant rather than as one generation-wide kit.

Coilover Damper Kit, Carrera RS (964)

The RS-specific fitment, valved apart from the Carrera 2 kit.

Coilover Damper Kit, 911 Turbo (964)

The 964 Turbo fitment.

Coilover Damper Kit, 911 Carrera 2 (993)

The 993 Carrera 2 fitment — a Japanese alternative to Bilstein and KW on the air-cooled cars.

Cup-Series Control Arm Kit, 992 Front

Tarett Engineering suspension listed for the 992, 996. Specification below is what the seller states; construction is not disclosed on the listing.

US$1,970.00Recorded 2026-08-17

Front Monoball Camber plate (pr), 992

Tarett Engineering suspension listed for the 992, 996. Specification below is what the seller states; construction is not disclosed on the listing.

US$649.00Recorded 2026-08-17

Rear Monoball Shock Mount (pr), 991/992

Tarett Engineering suspension listed for the 992, 991, 996. Specification below is what the seller states; construction is not disclosed on the listing.

US$525.00Recorded 2026-08-17

Cup-Series Control Arm Kit (Race Spec)

Tarett Engineering suspension listed for the 996. Specification below is what the seller states; construction is not disclosed on the listing.

US$1,846.00Recorded 2026-08-17

Rear Swaybar & Drop Link Kit, RSR Style, 911/912/930

Tarett Engineering suspension listed for the g-series. Specification below is what the seller states; construction is not disclosed on the listing.

US$749.00Recorded 2026-08-17

Rear Swaybar & Drop Link Kit, 911/912/930

Tarett Engineering suspension listed for the g-series. Specification below is what the seller states; construction is not disclosed on the listing.

US$625.00Recorded 2026-08-17

Wheel Spacers (pr)

Tarett Engineering wheels listed for the 996. Specification below is what the seller states; construction is not disclosed on the listing.

US$94.50Recorded 2026-08-17

Front Monoball Camber Plate (pr), 993/964

Tarett Engineering suspension listed for the 993, 964. Specification below is what the seller states; construction is not disclosed on the listing.

US$595.00Recorded 2026-08-17

Front Monoball Camber plate (pr), 981/991/718

Tarett Engineering suspension listed for the 991, 996. Specification below is what the seller states; construction is not disclosed on the listing.

US$649.00Recorded 2026-08-17

Bladed Swaybar & Drop Link kit, Front, 65-89 911/912/930/914- OUT OF STOCK

Tarett Engineering suspension listed for the g-series. Specification below is what the seller states; construction is not disclosed on the listing.

US$1,675.00Recorded 2026-08-17

Remote Reservoir Mount Set

Tarett Engineering drivetrain listed for the 996. Specification below is what the seller states; construction is not disclosed on the listing.

US$120.00Recorded 2026-08-17

RS Fan Hub Conversion, 911 (964 / 993)

Billet aluminium hub converting the two-belt drive to the single-belt arrangement of the factory RS.

£149.00Recorded 2026-08-18

Solid Eng/Trans Mount (pr), 911 (1966-89)

Part listed for the 901.

US$99.00Recorded 2026-08-19

Solid Trans Mount (pr), all 944

Part listed for the 944.

US$177.95Recorded 2026-08-19

Shifter Riser Spacer Kit, 986, 996, 987, & 997

Part listed for the 901, g-series, 964, 993, 996, 997, 991, 992.

US$99.00Recorded 2026-08-19

Shock Clevis Adapter (pr), 911 Rear

Part listed for the 901, g-series, 964, 993, 996, 997, 991, 992.

US$199.00Recorded 2026-08-19

SOLID ENGINE MOUNT PR, 964/993/996/997

Part listed for the 901, g-series, 964, 993, 996, 997, 991, 992.

US$375.00Recorded 2026-08-19

Rear Monoball Shock Mount (pr), 993/964

Part listed for the 901, g-series, 964, 993, 996, 997, 991, 992.

US$475.00Recorded 2026-08-19

Rear Monoball Shock Mount (pr), 996/997

Part listed for the 901, g-series, 964, 993, 996, 997, 991, 992.

US$435.00Recorded 2026-08-19

987 & 981/718 Bilstein PSS9/10/B16 Spring Upgrade Kit

Part listed for the 986, 987, 981, 982.

US$783.00Recorded 2026-08-19

Rear Monoball Shock Mount (pr), all 986/987/981/718

Part listed for the 986, 987, 981, 982.

US$595.00Recorded 2026-08-19

Solid Eng/Trans Mount (pr), 911 (1966-89)

Part listed for the 901.

US$149.00Recorded 2026-08-19

Tarett Engineering Front Monoball Camber plate (pair), 981/991/718

Suspension listed for the 901, g-series, 964, 993, 996, 997, 991, 992, 986, 987, 981, 982.

US$649.00Recorded 2026-08-19

Tarett Engineering Front Monoball Camber Plate (pair), 996/997 C4 or TT

Suspension listed for the 901, g-series, 964, 993, 996, 997, 991, 992.

US$549.00Recorded 2026-08-19

Tarett Engineering Front Monoball Camber Plate (pair), 996/997/986/987

Suspension listed for the 901, g-series, 964, 993, 996, 997, 991, 992.

US$525.00Recorded 2026-08-19

Tarett Engineering Front Monoball Camber Plate (pair), 993/964

Suspension listed for the 901, g-series, 964, 993, 996, 997, 991, 992.

US$595.00Recorded 2026-08-19

Rear Swaybar & Drop Link Kit, RSR Style, 911/912/930

Suspension listed for the 901, g-series, 964, 993, 996, 997, 991, 992.

US$749.00Recorded 2026-08-19

Swaybar & Drop Link Kit, Front RSR Style, 911/912/930/914 (1965-89)

Suspension listed for the 901.

US$749.00Recorded 2026-08-19

Rear Swaybar & Drop Link Kit, 911/912/930

Suspension listed for the 901, g-series, 964, 993, 996, 997, 991, 992.

US$625.00Recorded 2026-08-19

AutoTecknic Magnetic RS Shift Paddles - Porsche 992 | 971.2 | 95B.2 | 9Y0.2

Competition Shift Paddles listed for the 901, g-series, 964, 993, 996, 997, 991, 992.

US$465.00Recorded 2026-08-19

Madtrace® GEN2 FORMULA LINE Racing Steering Wheel System For PORSCHE 981/982/991 Chassis

Racing Steering Wheel System listed for the 901, g-series, 964, 993, 996, 997, 991, 992.

US$1,499.00Recorded 2026-08-19

Madtrace® GEN2 PODIUM LINE Racing Steering Wheel System For PORSCHE 981/982/991 Chassis

Racing Steering Wheel System listed for the 901, g-series, 964, 993, 996, 997, 991, 992.

US$1,699.00Recorded 2026-08-19

Solid Trans Mount (pair), 986/987/981

Part listed for the 986, 987, 981, 982.

US$329.00Recorded 2026-08-19

992 GT3 GiroDisc Rotors (for OEM Iron Rotors)

992.2 GT3 listed for the 901, g-series, 964, 993, 996, 997, 991, 992.

US$1,750.00Recorded 2026-08-19

992.2 Base / S GiroDisc Rotors (for OEM Iron Rotors)

992.2 Base / S / T (2025+) listed for the 901, g-series, 964, 993, 996, 997, 991, 992.

US$1,350.00Recorded 2026-08-19

992.2 GTS GiroDisc Rotors (for OEM Iron Rotors)

911 Carrera listed for the 901, g-series, 964, 993, 996, 997, 991, 992.

US$1,750.00Recorded 2026-08-19

992 Turbo GiroDisc Rotors (for OEM Iron Rotors)

911 Turbo listed for the 901, g-series, 964, 993, 996, 997, 991, 992.

US$1,750.00Recorded 2026-08-19

991.1 Carrera RR Racing Supercharger Kit

911 Carrera listed for the 901, g-series, 964, 993, 996, 997, 991, 992.

991.1 Carrera GiroDisc Rotors (for OEM Iron Rotors)

911 Carrera listed for the 901, g-series, 964, 993, 996, 997, 991, 992.

US$1,350.00Recorded 2026-08-19